2009 Audi A4 Avant Tail Light Replacement
-
04-07-201108:57 AM #one
Veteran Fellow member Four Rings
2009 A4 tail light removal to install LED tails
OK, then I've been searching the Internet forever and can't detect an reply. I found a place in Deutschland that makes an aftermarket LED tail lite assembly for 2009 A4. They sent me pics and they're absurd, actually had 3 options and I bought the Red/Smoked LED tails. They said it won't throw lawmaking errors, etc. My main concern is how to remove the sometime tail lights on my 2009 A4. I've looked effectually the trunk and plant my manner to the trunk tails just not 100% sure how to remove and especially the tail light assembly on the rear quarters of the car. How certain should I be that I can actually go from an old mode seedling lights to LEDs? And I need instructions to remove my lights. Thanks so much!
-
04-07-201101:42 PM #two
Established Fellow member Two Rings
Every bit shut equally nosotros are to a true OEM conversion.... So sad
Ibis White 2011 Audi A4 2.0T PremiumApril Stage II, Eurocode HFC and IC Pipe, ST Coils, OEM S4 19"
Halogen-->Bi-Xenon Conversion, Hoen Xenomatch Fogs, Blesk Plate LEDs
F1 Ceramic thirty%, P+ Stalks, Exhaust Tips, De-badged, Vag-Com Mods
-
04-08-201103:09 AM #three
Veteran Member Four Rings
Isn't it written how-to in your Owner's manual - it is in mine.
Rene Larsen
Audi A4 Avant 3.0 TDI quattro tiptronic MY2009 - sold
VCDS 21.9.0 (HEX-V2)
-
04-08-201104:25 AM #four
Senior Fellow member Two Rings
it is indeed,Rene...we actually have a gadget in our tools gear up to help remove them every bit y'all have to accept them out to change bulbs for instance
A4 B8 Avant TDI 143 MY2009
-
04-08-201108:48 AM #5
Veteran Member Iv Rings
I want your possessor's manual! Mine says to have it to dealer just to change the calorie-free bulbs as you have the possibility of removing trunk parts just to get to the bulbs! Are y'all guys in Europe or ROW? At that place is absolutely no "How-To" in my manual except for changing tires - thats almost information technology!
-
04-08-201108:54 AM #6
Senior Member Three Rings
It's super easy. For the outers, there's a portion of the rear body liner that you lot tin pull back to reveal a square nut. Yous can't run across it only you can feel for it. The nut is the only thing property the light in besides the electrical attachment. For the inners, peel back the trunk liner right there on the edge and just unscrew the one screw. Done.
-
04-08-201108:59 AM #7
Veteran Member Four Rings
And this is for a 2009 A4? What tool do you use for this foursquare nut? I've seen a blackness square thing sticking out and it has a hole going through it - do you just put a screwdriver or something through this pigsty and turn to loosen? And only 1 screw for the trunk/inners? wow!?
Originally Posted by neptunesfinest
-
04-08-201109:01 AM #viii
Veteran Member Four Rings
FYI - update! With the very valuable assist from David at AudiEnthusiasts.com he told me the LED lights I bought will not work. Anyone in my situation with a 2009 A4 / B8 with the ugly Halogen-bulb style lights has to await for a month or and then. Europrice.com in California is really testing an upgrade tail light set next week! Fingers crossed they piece of work! Thanks everyone!!!
-
04-08-201109:02 AM #9
Veteran Member Four Rings
Rene Larsen
Audi A4 Avant three.0 TDI quattro tiptronic MY2009 - sold
VCDS 21.9.0 (HEX-V2)
-
04-08-201109:07 AM #x
Veteran Fellow member 4 Rings
Rene! I luv you! I'm pretty mechanical with my cars, but worried well-nigh my Audi - it's my start "foreign," motorcar I've owned! I was going to the dealership and accept them do it for $51+ You saved me the hassle/headache of making an appointment, being without my automobile, spending $, etc! Thanks SO MUCH!!!!
Your new BBF in Omaha Nebraska!Originally Posted by rlarsen
-
04-08-201109:12 AM #11
Veteran Member Four Rings
Originally Posted by OmaHahn
Thanks
You should accept a apartment (sparse) plastic tool in the car's tool kit, that you lot can put betwixt the outer tail light housing and the car body, so y'all get some help when removing the tail.
Rene Larsen
Audi A4 Avant three.0 TDI quattro tiptronic MY2009 - sold
VCDS 21.9.0 (HEX-V2)
-
04-08-201109:14 AM #12
Veteran Member Iv Rings
The i matter that this diagram doesn't show is actually removing the unabridged tail lite on the "Inners / Trunk." Is it really but ane screw that holds the entire Body lite assembly in identify?
-
04-08-201109:16 AM #13
Veteran Fellow member Four Rings
Awwwww Rene has a new bff how cute
Reaching Me:Delight don't inquire me questions on the forum or send me private messages every bit it may be a while earlier I respond.
If you need something e-mail me direct at David@audienthusiasts.com I don't frequent this forum very often.
www.audienthusiasts.com
-
04-08-201109:19 AM #fourteen
Veteran Member 4 Rings
Speak of the Devil - David!!
Originally Posted by DavidB8
-
04-08-201109:21 AM #fifteen
Veteran Member Four Rings
Originally Posted by OmaHahn
Yes, ane screw - and then you need to "fold" the tail off the border (inner up and off the edge) - hope yous can follow me
Rene Larsen
Audi A4 Avant 3.0 TDI quattro tiptronic MY2009 - sold
VCDS 21.9.0 (HEX-V2)
-
04-08-201106:19 PM #16
Veteran Member Four Rings
Originally Posted past OmaHahn
This is true re the B8 NA manual - nil re How To stuff. Remember there was in my B5 manual.
The B8 ROW manual has it all
Cheers2009 three.2L Sedan BB/Beige. VMR V710 Gunmetal 19" Rims. Exterior Chrome Trim painted Quartz Grey. LED ROW tail lights. KW V1. H&R RSB. StopTech PosiQuiet Pads, Painted Calipers. HOEN Xenon Lucifer Fog Lamps. Fog Grilles converted to S-Line look. Stone Guards. FCA Rear Diffuser. LED interior lights, cup holder lights & door pocket lights. RS4 Pedals. Remus Mufflers.
-
04-08-201106:32 PM #17
Senior Member Iii Rings
Originally Posted by OmaHahn
Just loosen it with your paw. Information technology's a little snug but I didn't use any tools for the outers. Y'all'll need some pliers or a wrench for the inners though.
-
04-08-201107:13 PM #18
Veteran Member Four Rings
Originally Posted by OmaHahn
Were these the ones yous bought? The dectanes?
http://www.motor-talk.de/bilder/led-...203795239.html-cW
-
04-09-201107:49 AM #nineteen
Veteran Member Iv Rings
No I bought them from world wide web.TMtuning.com They are a Smoked/Carmine lens and the pics are so cool - but the guy I've been talking to says they but plug in (plug & play) with no wiring harness. Well, these are from Berlin Deutschland and asume they are made for the ROW Audi cars and NOT the Due north American - our cars wiring is completely unlike and needs a wiring harness/conversion kit.
Originally Posted by coolwater
-
04-xiii-201112:42 PM #twenty
Veteran Member 3 Rings
Ha this thread is extremely confusing.
Offset the OP mentions he has an '09.
Then RL posts a link to the 08 transmission.
OP is happy for the link.
So mentions his rear lights are from TMTuning which does not accept annihilation on their site on a B8 that I can find.
Geez... :)
-
04-13-201112:54 PM #21
Veteran Member Four Rings
Um, non disruptive at all! The '08 manual was very helpful - same calorie-free setup, etc - I looked at my lights and the same thing applies! I found the one screw for the torso lights and the one screw or commodities/nut for the outters! Every bit far as TM Tuning - information technology's a special order particular and not listed on the site. CS sent me an email with pictures of iii dissimilar styles. Pretty sweet if y'all live outside of NA! They take these ruddy/smoke LED tails.
Originally Posted by Pared
-
04-14-201106:44 AM #22
Veteran Fellow member Four Rings
Originally Posted past Pared
MY2008 in RoW is a B8 model platform - the same platform as MY2011
MY2008 in NA is a B7 model platform - AFAIK
The manual I posted a link to is a RoW MY2008 - therefore it is for the B8 model platform.
Rene Larsen
Audi A4 Avant 3.0 TDI quattro tiptronic MY2009 - sold
VCDS 21.9.0 (HEX-V2)
-
04-fourteen-201107:16 AM #23
Veteran Member Four Rings
Originally Posted by rlarsen
Wow - some people huh Rene!? Talk about embarrassing your self in front of so many people! If you don't know WTF you're talking nigh, keep your oral fissure shut. Thanks once more Rene for all your help!
-
04-xiv-201107:19 AM #24
Veteran Fellow member Four Rings
Originally Posted by OmaHahn
Glad I could aid
Rene Larsen
Audi A4 Avant iii.0 TDI quattro tiptronic MY2009 - sold
VCDS 21.9.0 (HEX-V2)
-
04-25-201102:02 PM #25
Veteran Member Iii Rings
Originally Posted by OmaHahn
This comment was completely unnecessary. But information technology simply speaks volumes about yous.
Thanks for the clar, Rene. Cheers for nothing, OP.
-
01-12-201201:x AM #26
Registered Member One Band
2009 A4 tail lite led
Has anyone bought and use these. It says that it a plug and play install.
http://www.ebay.com/itm/DEPO-NO-ERRO...rts_Accessorie
s&vxp=mtr#ht_5222wt_952
-
01-23-201209:26 AM #27
Active Fellow member Two Rings
This thread just hits a freaking dead end!
OmaHahn, did you lot go the lights installed on your 2009 B8, if so, were they indeed Plug and Play or did you have to exercise anything else? Did you take any pictures?
-
01-23-201210:l AM #28
Established Member Two Rings
Originally Posted by rlarsen
Rene, this is a very useful link. Do yous happen to take a link to the "Alphabetize" and then nosotros can have access to all the other useful how-to's?
-
01-23-201210:58 AM #29
Veteran Fellow member Four Rings
Originally Posted past nikonian83
You lot can go (download) the whole Possessor'due south Manual hither: http://www.audizine.com/forum/showth...-Owners-Manual
Rene Larsen
Audi A4 Avant three.0 TDI quattro tiptronic MY2009 - sold
VCDS 21.nine.0 (HEX-V2)
-
01-23-201211:33 AM #30
Established Member Two Rings
Originally Posted by OmaHahn
Hey, will you please post the three pics you got in email, I'd love to see... Also, did you get the wiring harness/adapter situated, did you have to buy that separately? AND, how much for everything?
-
01-24-2012x:48 PM #31
Established Fellow member Ii Rings
Originally Posted by rlarsen
Awesome. This volition be very useful. I'm taking commitment of my '12 A4 three weeks from today and this will be a fantastic reference.
-
05-nineteen-201510:06 PM #32
Veteran Member Four Rings
Originally Posted by OmaHahn
Originally Posted past rlarsen
Just to analyze for anyone attempting this in the time to come, this is the bracket that needs to exist removed to make the body tail light come off easily.
::2010 A4 Premium+ Quattro::6SMT::Shooting star Gray Pearl Effect::35% 3M tint all around::Vag mods::debadged::RS4 replica grille w/ fog grilles::LED interior lights and lic. plate lights::ST Coilovers::19x9 OEM A5 Peelers::245/35/19 Achilles ATR Sport::Underseat Storage Bins::Zubehor Diffuser::Door Handle storage bins::LED reverse Lights::
Former: 2008 A4 Southward-line::2007 Mazdaspeed3::1991 VW Cabriolet
DOWNLOAD HERE
2009 Audi A4 Avant Tail Light Replacement
Posted by: shepherdfordeal.blogspot.com
0 Response to "2009 Audi A4 Avant Tail Light Replacement"
Post a Comment